Minnesota Wire, a specialist in the custom design and production of cable assemblies for medical devices, has replaced the thermoplastic vulcanizate (TPV) elastomers that are standard in such applications with new styrenic thermoplastic elastomer (TPE-S) compounds from Teknor Apex Company, citing better performance initially and after autoclaving, superior processing, and an enhanced look and feel in the end product.
The TPE-S compounds, Medalist MD-8421, MD-8431, and MD-8451, comprise a series within Teknor Apex’s Medalist product range of high-purity medical elastomers that also includes other TPE types. Teknor Apex will publish new data on the compounds in a white paper soon to be available.
“We’ve tested the new Medalist compounds and found them to have better tensile and elongation properties than TPVs before autoclaving and to retain more of these properties after multiple autoclave cycles—an important advantage in the many medical devices intended for reuse,” said Jeff Lewison, Design Engineer at Minnesota Wire. “In addition, the Medalist compounds are more stable in extrusion, and in injection moulding their improved processability means that we can lower the pressures to reduce the likelihood of defects when we’re molding over delicate circuitry. Customers will like the fact that our product just looks and feels better.”
Enhanced electrical properties are another advantage of the new Medalist compounds cited by Mr. Lewison. “We can run cables with thinner walls, which enables them to coil better, and the improved electricals enable us to use these compounds in insulation as well as jacketing.”
The white paper by Teknor Apex will provide test data comparing the three new Medalist compounds with a standard medical-grade TPV used in wire and cable. In tests measuring tensile strength and elongation, all three Medalist grades exhibited greater values for these properties prior to autoclaving and greater property retention after as many as 15 autoclave cycles.
“The new Medalist compounds address the issue of limited resistance to multiple autoclave cycles that has been a problem for the TPVs that are currently the standard materials for medical wire and cable jacketing,” said Ross Van Royen, Senior Medical Market Manager for the TPE Division of Teknor Apex and a co-author of the white paper. “And while standard TPVs are restricted in colour to natural and black, TPE-S compounds are available in a variety of custom-matched colours that have important functional value in complex cable assemblies.”
Medalist MD-8421, MD-8431, and MD-8451 elastomers can be used for insulation, jacketing, and moulded fittings and connectors. They have Shore A hardness levels of 92, 69, and 82, respectively, a flammability classification of HB (UL-94), and a maximum continuous operating temperature rating of 105ºC (UL-1581). The three compounds also retain high levels of tensile strength, tensile modulus, and elongation after gamma irradiation and EtO sterilization, according to Teknor Apex. They are resistant to the cleaning and antimicrobial solutions commonly used in medical facilities.
The new TPEs are manufactured in an ISO-13485 facility dedicated to Medalist medical elastomers. Medalist 8421, 8431, and 8451 compounds pass ISO-10993-5 cytotoxicity testing, are RoHS- and REACH- compliant, and are free of animal-derived materials, phthalates, and latex proteins, states the group.