Meusburger has released The E 5076 and E 5078 Module guides in configurable lengths.
The modular concept from Meusburger enables customer flexibility during the design of die modules.
A variety of plates can be selected and the individual lengths of the modules ensure maximum flexibility in the total length of the modular die set.
After selecting the individual modules, the appropriate SH Two-pillar die set is automatically suggested and the direct interfaces to all common CAD systems and 3D data can be exported.
Meusburger says the slide-in aid reduces the processing costs and set-up times to a minimum, with the modular design wizard, the time-consuming and difficult selection of individual plates is no longer an issue.

When working with die modules, limited availability of space during the installation of springs is not uncommon, which is why the springs are often integrated in the guiding unit.
The l4 length of the guide pillars must be adapted for optimum adjustment, which is now selectable for the E 5076 and E 5078 Guide pillars for the modular concept.
After cutting to length, the tolerance is +0/-0.02 mm and the l4 length can be adjusted in the hundredth of millimetre range.